Utp receiver radio shack2/18/2023 Repeat the procedure with the striped wires. Taking a pair of needle-nose pliers, twist all four strands together. The sheathing comes off very easily revealing a single strand of copper wire. I combined the solid colors: green, brown, a weird shade of orange and blue and stripped all four wires at once with a utility knife. As mentioned above in other reviews there are eight individual wires - four striped and four solid. I swiftly purloined two 16' lengths and went to work. Of course our friendly network crew left yards of this wire when they installed our network. I was hugely skeptical that the ubiquitous blue sheathed CAT 5 cable that litters every office building from Phoenix, Arizona all the way to Tacoma could do anything but leave me shaking my head in disbelief that there are so many gullible punters out there enough to give this stuff a five star rating across the board. How often do you get a big something for next to nothing in the nefarious world of hi-fi? Almost never. With 48 24AWG twisted copper wires the sound is quite good, and was well worth the 2 1/2 hours to make, I am very happy with the sound and its a big improvement over the previous design plus its simple no breaking out pairs and twisting this with that its everything together.Ĭost $12 for the interconnects, wire free I started with 10 ft per and when completed the actual length is about 9 feet, I did this for each polarity, tighly twisting the copper pairs together at the end and trimming the excess for 24 copper wires per polarity, I zip tied the ends and used self sticking silcone tape. Taking from a previous post I used the 3 cables braided tightly to make one. This is my follow up post and I have made some changes to my previous setup which was 1 CAT 5 cable per polairty per speaker using Radio Shack Banana Plugs.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |